hahahah rasanya dah tampal sini tapi nak tampal lagi

Snap press kebanggaan saya

cara nak remove snap button

How to remove snaps

 

atau nota dari  sini

Removing Snaps

It is much easier to attach a snap than to remove it.  But if you have made a mistake with your plastic snap, you can try to remove it in a number of ways:

– Apply a small amount of heat to the cap prong at the center of the snap which holds the snap together. The heat will melt the prong, which will allow you to simply pull the 2 pieces of the snap apart. You can use a soldering tool if you have one (eBay has inexpensive “soldering pencils”), or just heat up the tip of a fork tine over a flame and quickly place it against the prong to melt it.

– Small pliers, wire cutters, or nail clippers can also be used to chip away at the sides of the snap or the snap prong until the snap breaks.

– Use a leather hole punch tool to punch a hole around the smushed prong.  This will create a larger center hole in the attached socket or stud, which will allow you to simply pull the 2 sides of the snap apart.

– Use a dremel/drill with a small rounded tip against the prong until the snap can be removed.

– Place your fabric upside down under the press (cap side up) or sideways. Press down as if you were applying a snap, and it should fall off.  We have a video showing how to do this with both the snap press and the pliers here.

Whichever method you try, be sure to go slowly so that you don’t damage your fabric.

more info

Instructions for Snap Press

Please watch or read the instructions in their entirety and practice on scrap fabric before using your press!

The instructions apply to both the DK-93 and the DK-98 KAM presses.

Related Posts with Thumbnails